User Guide

The GSOFT Smart Switch Box is a powerful IoT-enabled device, offering advanced features that surpass typical smart switch boxes available in the market. It simplifies and enhances home automation, delivering both convenience and performance.

Out of the box, it functions as a traditional switch box once connected to a power source. Users can control appliances via touch switches or a remote control. However, to unlock its full smart capabilities, the device must be connected to the internet.

To enable internet functionality, users must configure their home Wi-Fi router or mobile hotspot credentials in the switch box. Detailed Wi-Fi setup instructions are provided in the following sections.

Wire connection

Warning! Ensure that the main electrical power line (EB), UPS, and any other power sources are completely shut down before proceeding.

Follow the steps below to properly wire the device.

1. Power-Up Switch Box

  • Connect either EB or UPS power supply to the terminals labeled:
    • P (Phase)
    • N (Neutral)
    • E (Earth)
While using UPS is optional, it is recommended for uninterrupted power.

2. Switch Terminal Connection

There is no internal link between the power input terminals and the switch outputs. Users must manually connect wires from their power source (EB or UPS) to the IN terminal for each switch. Corresponding output should be connected via the OUT terminal.

This design simulates a traditional switch for easier installation and user-friendliness.

Mobile App download

The GSOFT Smart Switch Box supports intuitive web interfaces including a mobile app and website.

To get started, download the app via the appropriate link for your mobile OS (Android/iOS).

Create new user account

Already have an account? Simply log in to continue.

  • New user, to begin using the app:
    • Open the GSOFT app and tap the Sign Up button.
    • Enter your email address. You will receive a One-Time Password (OTP) for verification.
    • After entering the OTP, you'll be prompted to fill out your basic details and set a password.
    • Tap Submit to complete registration.
    • Upon success, a confirmation message will be shown.

You can now log in using your email and password.

Wi-Fi Setup for Internet Connection

Follow these steps to connect your switch box to the internet:

  • Pre-Checklist:
    • Ensure your internet is active.
    • The switch box is powered ON.
    • You're logged into the latest GSOFT app.
    • Wi-Fi is enabled on your mobile device.
  • Steps to Configure Wi-Fi:
    • Enable Wi-Fi Configuration Mode on the switch box. It can be enabled in 2 ways,
        • Using the Remote control: Press L9, then L3 immediately.
        • Using the Touch Button: Press the first touch switch (may vary by model) for 15 seconds.
          •  First touch switch may be fan switch or regular switch
    • The switch box LED will start blinking, indicating Wi-Fi mode is active.
    • Open the GSOFT mobile app.
        • Navigate to the Settings tab (bottom of the screen).
        • Select Device Wi-Fi Setup.
        • Enter your Wi-Fi SSID and password.
        • Tap Submit.
        • Accept any permission prompts if shown.
        • Upon success, a green confirmation message will appear.
        • The newly added device will now be visible on the Home screen.
Timer

The timer function is a powerful tool that allows users to automate switches and fan speeds based on predefined schedules.

Note:An internet connection is required only during the timer creation or deletion process. Once configured, timers operate independently without internet.

Timer Types:

Once Executes once and deletes itself.
Daily Triggers every day.
Weekly Triggers on selected day of the week.
Monthly Triggers on specific dates each month.
Yearly Triggers on specific dates annually.
    Create a New Timer
    • In the mobile app, tap the blue arrow on the target device
    • Go to the Configure tab.
    • Tap the Timer icon for the switch you want to automate.
    • On the timer list page, tap Add Timer.
    • Choose your desired timer type and settings.
    • Tap Submit.

The new timer will appear in the timer list for that switch.

    Delete an Existing Timer
    • Go to the appropriate switch’s timer list.
    • Tap the red X icon next to the timer you want to delete.
    • The timer will be removed immediately.
Scene

Scene is an advanced and powerful feature of a home automation system. It allows users to control multiple switches across different switch boxes through both software and hardware events. Users can configure individual delays for each switch, providing greater flexibility to achieve their intended operations via the smart box. It also supports the inclusion or exclusion of specific events based on user preferences. Since scene triggers are executed by the server, the device must have an active internet connection.

    Scene Modes:
    • User Control: Events are triggered manually by the user via the mobile app.
    • Event Control: Events are triggered automatically by hardware or connected devices. For example, turning a switch on or off, adjusting fan speed, etc.
    Create a New Scene
    • In the mobile app, tap the Scene at bottom of the app
    • Go to the New Scene tab.
    • Set Scene Name, like party, evening mood, etc
    • Select scene mode in "Enable by" selection option
    • Set trigger and action list based on visible option.
    • Tap Submit.
    Delete an Existing Scene
    • Go to the appropriate scene group like user/event from Scenes.
    • Tab Red marked >> icon to expand the intended scene.
    • Tap the red X icon next to the timer you want to delete.
    • The Scene will be removed immediately.
      • =

Multi User Support

Multi-user support is an advanced feature that allows multiple household members or guests to use the device without sharing their personal login credentials. It enhances security and provides transparent access control to the device.

    Add a new user
    • In the mobile app, tap the blue arrow on the target device
    • Go to the User tab.
    • Tap the Add User button.
    • Enter the registered email address of the new user.
    • Tap Submit.

The new user will now be able to view and control the device, as well as create, view, and delete scenes, users, and more.

    Delete an Existing User
    • Go to the appropriate switch’s User list.
    • Tap the red X icon next to the user you want to delete.
    • The User will be removed immediately.

Miscellaneous features

Touch Refresh The touch switch is a modern feature in the switch box that provides a smooth and pleasant user experience. However, environmental factors may occasionally affect touch sensitivity. If issues occur, press the Touch Refresh button to recalibrate the system based on the current environmental conditions.
App: Home -> Target Device -> Tab Blue Arrow -> Setting->Device Touch Refresh.
Remote control: Press L9, then L2 immediately.
Reboot Switchbox Reboots the device.
App: Home -> Target Device -> Tab Blue Arrow-> Setting->Device Reboot.
Remote control: Press L9, then L7 immediately.
Timer Reset Clears all timers configured in the target switch box.
App: Home -> Target Device -> Tab blue Arrorw-> Setting->Reset All Timers.
Device Back White light Turns the back white light of the target switch box ON or OFF.
App: Home -> Target Device -> Tab Blue Arrow-> Setting->Device Back Light.
Remote control: Press L9, then L1 immediately.
Device Rename Allows the user to rename the device and its switches.
App: Home -> Target Device -> Tab Blue Arrow-> Configure->Click Pen Icon next to Device/Switch Name.
Device Group Enables grouping of multiple devices for easier access and control.
To Rearrange Device list
App: Home -> Tab Vertical Tripple Dot icon at Top Right -> Drag & Drop to set device order -> Submit.
To Create Group and Sub Group
App: Home -> Tab Vertical Tripple Dot icon at Top Right -> Green Add Icon.
In Menu,
- Add Icon represents to create new group, sub group and add device in a specific group.
- Subtract Icon represents to delete new group, sub group and remove device from a specific group.